- Y-Block Ext. Phase-7 DHA Lahore - Pakistan
- +92 0300 8443466
+92 42 35734455
CreteCoat 440 is a two-component solvent-borne Polyurethane acrylic enamel coating which is engineered for decorative and protective purpose. This high-performance coating can be used for various applications due its high durability, protection from environmental conditions as well as its superior working finish.
CreteCoat 440 is a versatile coating and its applications span a wide range of industries. Some of the most common uses include:
It is always important to apply the product correctly if the user intends to maximize on the strengths that resource offers such as CreteCoat 440. Below are the general steps involved in applying this coating:
Prepare the Surface:
The surface requires to be smooth, flat and release from all categories of contamination including dust, oil & grease, and rust. Where the substrate material is concrete or metal it could then become necessary to remove dirt or create some roughness on the surface to improve anchor strength.
Mixing:
CreteCoat 440 is a two-package system, it means that base resin and hardener should be blended One hundred percent. The mixing ratio should measure the correct chemical reaction that should be recommended by the manufacturer. Usually the ratio you are given is in volume (4:1 base to hardener).
Application:
The coating can best be applied by conventional spray equipment, brush, and roller. While using a spray it is the easiest and fastest method to apply especially when working with large area projects that require a uniform and consistent coat layer.
Drying & Curing:
Subsequent to the Cretaceous CreteCoat 440 has a comparatively short drying period associated with touch-timed eventualities (preferably within fifteen to thirty minutes). But for a complete curing there can be a couple of hours up to 24hrs especially when thick coat of paint was applied and the condition of the environment.
Second Coat (Optional):
As a rule, if getting the optimum protection and the highest quality of the surface it is possible to apply the second coat when the first one is already completely dry.
| Packing | 25Kg Bag |
| Shelve Life | upto 12 months |
| Storage | store in dry and cool place with unopened and original packs |